PRICE IS FOR ENTIRE SET OF 6 FUEL INJECTORS
NOW WITH NO CORE CHARGE
PROFESSIONALLY RECONDITIONED, ULTRASONICALLY CLEANED, AND FLOW MATCHED!
YOU WILL GAIN PERFORMANCE AND GAS MILEAGE WITH A FLOW MATCHED SET OF OUR INJECTORS, EVEN IF YOU THINK YOURS ARE “WORKING” THEY ARE NOT AT 100% EVEN IF YOUR VEHICLE IS ONLY 3-4 YEARS OLD!
This is a Factory Set. Not an upgrade in Terms of flow.
M30 Fuel Injected Motors
0 280 150 714, Fuel Injector
Our injectors are rebuilt through the following process;
1. Visual inspection for any physical damage that would render the injector inoperable
2. All soft parts are removed (o-rings, filters, caps etc…) YES THE FILTERS “INSIDE EACH INJECTOR” are removed!
3. Any dirt, grease and paint is removed from the outside of each injector
4. All injectors are submerged in a cleansing bath under “ULTRASONIC VIBRATION” This powerful vibration with the presence of the concentrated cleaning solution breaks down all deposits and sludge built up inside each injector. The injectors are pulsed open and closed rapidly during this process to help remove contaminants.
5. All injectors are then FLOWED BACKWARDS under high pressure to flush out any remaining contaminants
6. All injectors are flowed and we look for a good evenly distributed spray pattern and proper electronic operation and current draw, along with a high pressure leak test.
7. All injectors are grouped in flow matched sets within 1% variance (factory allows a variance of usually 3%-5%)
7. All metal bodied injectors are clear coated or repainted for that “like new” look.
8. All o-rings caps and filters are replaced and the injectors are then packaged.